Table of Contents
Advertisement
3. Installation
3.1. Installing Windows
1. Insert the disk labeled "USB Serial Adapter Installation
Disk" into your floppy drive (typically drive A:).
2. Insert the flat (type A) connector into an available USB
port on your PC or USB hub attached to your PC.
3. Insert the square connector (type B) into the USB Serial
Adapter device. You will see an Add New Hardware Wizard.
4. Click "Next".
5. When asked "What do you want Windows
choose Search for the best driver for your device
(Recommended). Click "Next".
6. To search for new drivers, choose Floppy disk drives.
Click "Next".
7. Make sure the location of the driver is your floppy drive.
Click "Next".
8. The final dialog says "Windows
the software that your new hardware device requires."
Click "Finish".
®
98 Drivers
®
has finished installing
3
®
to do?"
Advertisement
Table of Contents
