Anti-Rebound Bar (Arb) - Britax ONE4LIFE CLICKTIGHT Canadian User Manual

Anti-Rebound Bar (ARB)

In the event of a crash, the anti-rebound bar is designed to help
prevent rebound rotation in rear-facing car seat installations.
Installing the Anti-Rebound Bar
• The anti-rebound bar is not intended for use as a carry
handle. Do not use the anti-rebound bar to carry this
child seat.
• The anti-rebound bar MUST be used rear-facing.
• The anti-rebound bar MUST be removed for forward-
facing installation.
1. Open the CLICKTIGHT
door. Squeeze the
CLICKTIGHT release
buttons underneath
the front cover flap
and lift to open.
2. Insert the anti-rebound
bar into the two
openings at the front of
the seat.
3. Attach elastic bands
from the cover to the
hooks on the shell.
4. Pull the anti-rebound
bar away from child
restraint on both sides
to confirm connections.
Removing the Anti-Rebound
Bar
1. Open the CLICKTIGHT
door.
2. Unhook elastic bands
from the front of the seat.
3. Push the inner red button.
Pull the anti-rebound bar
away on one side. Repeat
on the other side.
WARNING!
PUSH
17