Advertisement
6. Use description field to further
identify the computer. Type in a
description such as "Windows
98". This can be anything you
want and does not have to be
different from or the same as the
description of any other
computer on the network. You
may also leave this field blank.
Click Next and the following
screen will appear:
7. If you want to share files and printers
on this computer, select "I want to
share files and printers on my
computer" and click "Finish." The
following screen will appear:
8. NetSetup now needs to know if you want to create a client setup floppy
disk. If you have more computers that you need to set up to work with the
wireless network, click "Yes". This will save some setup files to a disk,
simplifying setup of subsequent computers. If you are not going to set up
any more computers, click No and move to step 11.
9. If you clicked Yes, you will be prompted to insert a floppy disk into the PC's
floppy disk drive. Label a floppy disk "Belkin Networking" and insert it into
the floppy disk drive. Click OK.
10. After the client setup disk has been created, you will be prompted to restart
your computer. So, please restart your computer.
33
Advertisement
