Advertisement
Since Windows
automatically detect the installation of the PCI adapter. To manually
install the PCI Software Drivers, follow the steps below. After Windows
NT starts up,
1. Turn on the power to the PC. After Windows NT starts up, insert the CD
into your CD-ROM drive.
2. Click on "Start", select
"Settings" then click on
"Control" panel to open the
"Control Panel" Window.
3. Double-click on the "Network
Icon". The screen below will
appear. A list of adapter may
appear in the window, however
the Belkin PCI adapter will not.
Click on "Add".
NT is not a plug-and-play operating system, it will not
®
12
Advertisement
