Table of Contents
Advertisement
wireless networking
Depending on your network settings, you will have to enter the proper
information into the IP address settings. If you are using your Card with
a network that assigns IP addresses automatically using a DHCP server,
then select "Use server-assigned IP address". This is the factory default
setting. After making any changes, click "OK" at the top of the screen to
save any changes and finish.
To enter a specific IP address:
1.
Select "Use specific IP address".
2.
Type in the IP address, subnet mask, and default gateway. This information
can be provided to you by your network administrator if you do not have it.
3.
Next, click the "Name Servers" tab.
4.
Enter the DNS address and the Alt DNS address. If you also require WINS
addresses, type these in as well. This information can be provided to
you by your network administrator if you do not have it.
5.
Click "OK" to save any changes and finish.
31
Advertisement
Table of Contents
