Using The Card - Belkin F5D6060 User Manual

wireless networking

Using the Card

After inserting the Card for the first time, if you have installed
the software, the Wireless Configuration Utility screen (see below) will
appear automatically on your portable device. If you are using the Card in
a wireless network with an access point or wireless router, then the factory
settings of the Card should already be set correctly to enable access to a
wireless network that is NOT using encryption. If you need to make
changes to the settings to access your wireless network, the following
sections explain how to make these changes.
Configuration Utility displayed on a Pocket PC
Configuration Utility displayed on a handheld PC
11