Table of Contents
Advertisement
8. Disconnect after X....
The Disconnect feature is used to automatically disconnect the Router from
your ISP when there is no activity for a specified period of time. For
instance, placing a check mark next to this option and entering "5" into the
minute field will cause the router to disconnect from the Internet after five
minutes of no Internet activity. This option should be used if you pay for
your Internet service by the minute.
Setting your Connection Type if you are a Telstra Big Pond User
[Australia Only] Your user name and password are provided to you by Telstra Big
Pond. Enter this information below. Choosing your state from the drop-down
menu (6) will automatically fill in your login server IP address. If your login
server address is different than one provided here, you may manually enter the
login server IP address by placing a check in the box next to "Manually Enter
Server IP Address" (4) and type in the address next to "Login Server" (5). When
you have entered all of your information, click "Apply Changes" (7). After you
apply the changes, the Internet Status indicator will read "connection OK" if
your Router is set up properly.
(1)
(2)
(3)
(4)
(5)
1. Select your State
Select your state from the drop-down menu (6). The "Login Server" box
will automatically be filled in with an IP address. If for some reason this
address does not match the address that Telstra has given you, you can
manually enter the login server address. See "Manually Enter Server IP
Address" (4).
ALTERNATE SETUP METHOD
31
(6)
(7)
Hide quick links:
Advertisement
Table of Contents
