Using The Wireless Mode Switch; G And B Mode; G Only Mode; When To Use B Only Mode - Belkin F5D7230-4 User Manual

Using the Web-Based Advanced User Interface

Using the Wireless Mode Switch

Your Router can operate in three different wireless modes:
"g and b", "g only", and "b only". The different modes are
explained below.

g and b Mode

In this mode, the Router is compatible with 802.11b and 802.11g
wireless clients simultaneously. This is the factory default mode and
ensures successful operation with all Wi-Fi-compatible devices. If
you have a mix of 802.11b and 802.11g clients in your network, we
recommend setting the Router to g and b mode. This setting should
only be changed if you have a specific reason to do so.

g only Mode

g only mode works with 802.11g clients only. This mode is
recommended only if you want to prevent 802.11b clients from
accessing your network. To switch modes, select the desired
mode from the "Wireless Mode" drop-down box. Then, click
"Apply Changes".
b only Mode
We recommend you DO NOT use this mode unless you have a very
specific reason to do so. This mode exists only to solve unique
problems that may occur with some 802.11b client adapters and is
NOT necessary for interoperability of 802.11g and 802.11b standards.

When to use b only Mode

In some cases, older 802.11b clients may not be compatible with
802.11g wireless. These adapters tend to be of inferior design and
may use older drivers or technology. Switching to this mode can solve
problems that sometimes occur with these clients. If you suspect that
you are using a client adapter that falls into this category of adapters,
first check with the adapter vendor to see if there is a driver update. If
there is no driver update available, switching to b only mode may fix
Please note that switching to b only mode will decrease
your problem.
802.11g performance.
45 45
1
2
3
4
5
6
7
8
9
10