Wpa (Wi-Fi Protected Access); Wpa-Psk (No Server) - Belkin F5D7230-4 User Manual

Using the Web-Based Advanced User Interface Using the Web-Based Advanced User Interface

WPA (Wi-Fi Protected Access)

WPA (Wi-Fi Protected Access) is a new Wi-Fi standard that was
designed to improve upon the security features of WEP. To use WPA
security, the drivers and software of your wireless equipment must
be upgraded to support WPA. These updates will be found on the
wireless vendor's website. There are two types of WPA security,
WPA-PSK (no server) and WPA (with radius server).

WPA-PSK (no server)

as the network key. A network key is basically a password that is
between eight and 63 characters long. It can be a combination of
letters, numbers, or characters. Each client uses the same network
key to access the network. Typically, this is the mode that will be
used in a home environment.
For a list of Belkin wireless products that support WPA, please visit
our website at www.belkin.com/networking.
uses what is known as a pre-shared key
50 50