Belkin F5D7230-4 User Manual page 87

Using the Web-Based Advanced User Interface
Changing System Settings
The "System Settings" page is where you can enter a new administrator
password, set the time zone, enable remote management, and turn on and
off the NAT function of the Router.
Setting or Changing the Administrator Password
The Router ships with NO password entered. If you wish to add a password
for greater security, you can set a password here. Write down your password
and keep it in a safe place, as you will need it if you need to log into the
Router in the future. It is also recommended that you set a password if you
plan to use the remote management feature of your Router.
Changing the Login Timeout Setting
The login timeout option allows you to set the period of time that you can
be logged into the Router's advanced setup interface. The timer starts when
there has been no activity. For example, you have made some changes in
the advanced setup interface, then left your computer alone without clicking
"Logout". Assuming the timeout is set to 10 minutes, then 10 minutes after
you leave, the login session will expire. You will have to login to the Router
again to make any more changes. The login timeout option is for security
purposes and the default is set to 10 minutes.
Note:
Only one computer can be logged into the Router's advanced setup
interface at one time.
85 85
1
2
3
4
5
6
7
8
9
10
11