Belkin F5D7230-4 User Manual page 17

Connecting and Configuring Your Router
and working at the time of installation. If it is not, you must use the
"Alternate Setup Method" section of this manual to configure your
Router. Additionally, if you are using an operating system other than
Windows 98SE, Me, 2000, or XP, you must set up the Router using
the "Alternate Setup Method" section of this manual.
IMPORTANT:
Run the Easy Install Wizard software from the
computer that is directly connected to the cable or DSL modem.
DO NOT CONNECT THE ROUTER AT THIS TIME.
Step 1 Run the Easy Install Wizard Software
1.
Shut down any programs that are running on your computer at
this time.
2.
Make sure you have the following items at the computer that is
now directly connected to the cable or DSL modem. DO NOT
CONNECT THE ROUTER AT THIS TIME.
• Quick Installation Guide
• The Easy Install Wizard CD-ROM
• The Router
• The Router power supply
• RJ45 Ethernet networking cable
• This User Manual
3.
Turn off any firewall or Internet connection sharing software on
your computer.
4.
Insert the Easy Install Wizard software CD into your CD–ROM
drive. The Easy Installation Wizard screen will automatically
appear on your screen within 15 seconds. If it does not, select
your CD-ROM drive from "My Computer" and double-click on the
file named "EasyInstall.exe" on the CD-ROM.
15 15
1
2
3
4
5
6
7
8
9
10
11