Autoscan Mode - Belkin OmniView F1DK102P User Manual

2-port kvm switch withbuilt-in cabling

Hide thumbs Also See for OmniView F1DK102P:

Table of Contents

USING YOUR SWITCH

You can switch directly to any port by entering the Switch port number you wish

to use. For example, if you press "SCROLL LOCK", "SCROLL LOCK", "2", the

computer on port 2 will be selected.

Switch to Port 2—(2)

AutoScan Mode

In AutoScan mode, the Switch remains on one port for eight seconds before

switching to the next. This time interval cannot be changed.

To enable AutoScan mode, press "SCROLL LOCK", "SCROLL LOCK", "S".

Note: There is no mouse or keyboard control in this mode by design, in order to

prevent errors. If it were enabled, the user could move the mouse or use the

keyboard while the KVM Switch is switching to the next port. This could interrupt

communication between the computer and Switch that might cause erratic mouse

movement, or result in errant display of characters when using the keyboard.

To disable AutoScan mode, press the space bar.

Table of Contents

F1dk102pq