NEC ME403U User Manual page 100

5. Put the filter unit back to the projector cabinet.
Insert two catches of the tip of the filter unit into the groove of
the cabinet, and push the button to close the filter unit.
• Push the filter unit until it clicks into place.
This completes the filter replacement.
Go on to the clearing lamp and filter hour meters.
To clear the lamp usage hours and the filter usage hours:
1. Place the projector where you use it.
2. Plug the power cord into the wall outlet, and then turn on the projector.
3. Clear the lamp usage hours and the filter usage hours.
1) Press MENU button and the OSD displays. Press
2) Press button to select "Lamp counter reset", press
sage displays. Select Yes to proceed.
Press button to select "Filter", press
and press ENTER. The "Filter counter reset"?" message displays. Select Yes to proceed.
Filter counter reset?
Yes
： Move
ENTER
button or ENTER. Press
No
： Select ： Back
EXIT
button to select Expand menu, press
button or ENTER. The "Lamp counter reset?" mes-
button to select "Filter counter reset"
： Move
89
9. Maintenance
button or ENTER.
Lamp counter reset?
Yes No
： Select ： Back
ENTER EXIT