Windows
Change printer port from LPT1 to AutoSwitch port:
(Windows
®
95/98 only, for Windows NT
If one of the four devices being shared is a printer, you must follow the
procedure below to reconfigure the port connected to the printer. If none of
the devices are printers, then you can skip to page 17.
•
Click on "Start", select "Settings", and double-click on "Printers".
•
Right-click on the printer installed on the Bitronics switch, and click
on "Properties":
®
95 / 98 and NT
12
®
(continued)
®
go to Page 15)