Jumper Power Cord - Cisco MDS 9100 Series Hardware Installation Manual

Supported Power Cords and Plugs
Figure 1-3
1 Argentina,
2 North America
3 Australia, New Zealand
4 Europe

Jumper Power Cord

Figure 1-4
Cisco MDS 9148S Switch. The C15 connector connects into the C14 inlet on the Cisco MDS 9148S
Switch power supply, while the C14 connector connects into the C13 receptacle of a power distribution
unit for a cabinet.
Cisco MDS 9148S Multilayer Switch Hardware Installation Guide
1-68
300-W Power Supply Plugs
1
3
5
7
IRAM 2073 plug (10 A)
NEMA 5-15P plug (15 A)
SAA/3 plug, AS/NZS 3112-1993 (10 A)
VIIG Plug, CEE (7) VII (16 A)
shows the C14 and C15 connectors on the optional jumper power cord for the
2
4
6
8
5 Italy
1/3G plug, CEI 23-16 (10 A)
6 United Kingdom
BS89/13, BS 1363/A
(13 A; replaceable fuse)
7 South Africa
EL 208, SABS 164-1 (10 A)
8 Switzerland
12G SEV 1011 (10 A)
Chapter 1 Cable and Port Specifications
OL-20185-01