Cisco MDS 9100 Series Hardware Installation Manual page 28

Installing the Switch in a Cabinet with Insufficient Front Clearance
cables is maintained. In these cabinets, the Cisco MDS 9148S switch is mounted backwards, with the
fiber-optic cables facing toward the rear of the cabinet and the power supplies facing the front of the
cabinet.
Caution
If the rack is on wheels, ensure that the brakes are engaged or that the rack is otherwise stabilized.
The rack-mount kit provided with the switch contains the items listed in
Description
30- to 36-inch slider rails
24- to 30-inch slider rails
18- to 24-inch slider rails
Front rack-mount brackets
12-24 x 3/4-inch Phillips binder-head screws
10-32 x 3/4-inch Phillips binder-head screws
M4 x 6-mm Phillips flat-head screws
12-24 cage nuts
Cisco MDS 9148S Multilayer Switch Hardware Installation Guide
2-22
Table 2-1 Table 2-1 Cisco MDS 9148S Fabric Switch Rack-Mount Kit
Chapter 2 Installing the Cisco MDS 9148S Switch
Table
Quantity
2 per kit
2 per kit
2 per kit
2 per kit
10 per kit
10 per kit
6 per kit
10 per kit
2-1.
OL-20185-01