Optical Specifications For Cisco Cwdm Sfp Transceivers - Cisco MDS 9100 Series Hardware Installation Manual

SFP Transceiver Specifications
Environmental Conditions and Power Requirements for 8 Gbps
Table 1-10
Table 1-10 Optical Parameters for 8 Gbps
SFP+
DS-SFP-FC8G-SW
DS-SFP-FC8 G-LW
DS-SFP-FC8G-ER
Table 1-11
Table 1-11
SFP+
DS-SFP-FC16G-SW
DS-SFP-FC16G-LW

Optical Specifications for Cisco CWDM SFP Transceivers

Table 1-12
have an optical link budget of 28 decibels (db).
Note
The parameters are specified over temperature and at end of life unless otherwise noted.
Cisco MDS 9148S Multilayer Switch Hardware Installation Guide
1-60
provides the optical parameters for 8 Gbps.
Average Transmit Power
(dBm)
Max Min
-1.3 -10 (2 Gbps)
-9 (4 Gbps)
-8.2 (8 Gbps)
-3 (2 Gbps) -11.7 (2
Gbps)
-1 (4 Gbps)
-8.4 (4 Gbps)
0.5 (8
Gbps) -8.4 (8 Gbps
4 -4.7
provides information on operating and storage temperature ranges for 8 Gbps.
Operating and Storage Temperature Ranges for 8 Gbps
provides the optical specifications for CWDM SFP transceivers. CWDM SFP transceivers
Average Receive Fiber Loss Budget (dB)
Power (dBm)
Max Min 62.5 microns
[OM1])
0 — 2.10 (2 Gbps)
1.78 (4 Gbps)
1.58 (8 Gbps)
-3 (2 Gbps) — -7.8 (2 Gbps)
-1 (4 Gbps) 7.8 (4 Gbps)
0.5 (8 6.4 (8 Gbps)
Gbps)
-1 —
Operating
Max Min
40°C 0°C
40°C 0°C
Chapter 1 Technical Specifications
(50.0 microns
[OM2])
2.08 (4 Gbps)
1.68 (8 Gbps)
1.63 (16 Gbps)
10.9
Storage
Max Min
85°C -40°C
85°C -40°C
(50.0 microns
[OM3])
3.31 (2 Gbps)
2.88 (4 Gbps)
2.04 (8 Gbps
OL-20185-01