Installing A Fan Module - Cisco MDS 9100 Series Hardware Installation Manual

Removing and Installing Components
Step 4
Pull the fan module out of the switch and put it in a safe place.

Installing a Fan Module

To install a new fan module, follow these steps:
Step 1
Position the fan module with the LED oriented away from the back of the switch.
fan module for the Cisco MDS 9148S switch.
Step 2
Slide the fan module into the switch until it clicks into place.
Figure 2-7
Figure 2-7
Cisco MDS 9148S Multilayer Switch Hardware Installation Guide
2-32
shows the Cisco MDS 9148S fan module.
Cisco MDS 9148S Fan Module
Chapter 2 Installing the Cisco MDS 9148S Switch
Figure 2-7 shows the
OL-20185-01