Belkin F1U125-KIT User Manual page 13

14. Click on SPOOL SETTINGS and click on "Start printing after last page is spooled".
15. If NOT grayed out, click on "Disable bi-directional support for this printer".
Otherwise, ignore.
16. Click OK in the Spool Settings window, and OK again in the main properties window.
Example: Two Printers Shared Between One Computer
The Bitronics Software automatically handles printing chores by directing your print jobs to the
correct port on the switch based on the settings you set in the Printer Properties and the Settings in
step 7 previously. When you print something in Windows , you simply select the printer you
wish to print to, and the Bitronics software handles the switching duties. ITS FULLY
AUTOMATIC!
How does it work? The Bitronics software tells the Bitronics switch to switch to the port
the selected printer is connected to. In the example below, the Bitronics software tells the
Bitronics switch to switch to Port B first, then it allows the print job to go through the
switch, out to Port B, and to the Epson printer.
VII. Using the Bitronics Software
12