Reassembly
Refer to the reassembly illustrations in this guide.
Reassembly Steps
1.
Insert the valve into the clip.
2.
Push the valve clip onto the elbow and insert the swivel into the end
of the elbow.
3.
Replace the ports cap.
4.
Fit the cushion into the channel of the frame. Fit the top section fi rst,
then work your way around, pushing the cushion into the frame.
Ensure that the cushion is not twisted or distorted around the frame.
5.
Replace the soft sleeves onto the spring frame and align the spring
frame with the frame.
6.
Starting at the top, gently push and click the spring frame into the
frame.
7 .
Gently push and click each side of the lower spring frame into the
frame.
8.
Replace the elbow into the mask assembly.
4