Smartphone Docking; Installing/Uninstalling The Station; Inserting/Removing The Smartphone - Fiat PANDA 2016 Owner's Handbook Manual

SMARTPHONE
DOCKING
(for versions/markets, where provided)
Depending on the trim level, the vehicle
may be equipped with a smartphone
docking station to be installed on the
dashboard.
Installing/uninstalling
the station
Install the smartphone docking station
by inserting it in the specific seat on the
dashboard, illustrated in fig. 32 (click
fit).
32
To remove the docking station, press
both side buttons fig. 33simultaneously.
Note When the smartphone docking
station is not in use, it is recommended
to remove it from its seat to avoid
noise and/or vibrations.
30
33
Inserting/removing the
smartphone
To insert the smartphone in the docking
station:
F1D0702
34
ensure that the ring nut A fig. 34 is
turned to position
insert the smartphone horizontally in
its seat, placing it on the base of the
docking station, and press to open the
gripping hand fig. 35;
35
F1D0700
lay the smartphone on the front
base and release it. The load on the
spring inside the docking station will
allow the gripping hand to close;
block the smartphone by turning the
ring nut A fig. 34 so that it clicks into
position
F1D0703
;
36
The rear knob B fig. 36 allows
possible adjustments depending on the
weight and geometry of the
smartphone.
F1D0699
B
F1D0701