Audio Settings; Menu Button Function; Radio (Tuner); Frequency Band Selection - Fiat PANDA 2016 Owner's Handbook Manual

Press the button again to deactivate
the Mute function. The volume will
gradually increase until it reaches the
level set previously.

Audio settings

The functions that can be selected from
the audio menu change depending on
the context: AM/FM/CD.
Press the button briefly to change
the Audio functions.
After the button is first pressed, the
display will show the bass level value
for the source activated at that time
(e.g. in FM mode the display will show
the wording "FM Bass +2").
Use the or
through the menu functions. To change
the setting of the function selected
use the or
status of the selected function appears
on the display.
The functions managed by the Menu
are:
BASS: adjustment of bass tones;
TREBLE: adjustment of high tones;
BALANCE: right/left balance
adjustment;
FADER: front/back balance
adjustment;
LOUDNESS: activation/deactivation
of the increase of bass and high tones;
182
selection of factory-set equaliser levels;
equaliser setting.
MENU

MENU button function

Press the button MENU briefly to
activate the Menu function. The display
will show the first menu item that can
be adjusted (AF) ("AF Switching On" on
the display).
Use the
through the Menu functions. To change
the setting of the function selected
use the
buttons to scroll
The current status of the selected
function appears on the display.
The functions managed by the Menu
buttons. The current
are:
activation/deactivation of the selection
of the station with the strongest signal
that transmits the same programme.
activation/deactivation of traffic
information (only on FM band).
deactivation of regional programmes.
setting.
automatic volume control.
EQUALISER: activation and
USER EQUALISER: customised
or buttons to scroll
or buttons.
AF SWITCHING: automatic
TRAFFIC INFORMATION:
REGIONAL MODE: activation/
MP3 DISPLAY: CD MP3 display
SPEED VOLUME: speed-dependent
RADIO ON VOLUME: maximum
radio volume limit activation/
deactivation.
RADIO OFF: off mode selection.
SYSTEM RESET: reset of factory
settings.
Press the button MENU again to exit
the Menu function.
Note The AF SWITCHING, TRAFFIC
INFORMATION and REGIONAL MODE
adjustments are only possible in FM
mode.

RADIO (Tuner)

To select the Radio function when
another audio source is being listened
to, briefly press the FM, AS or AM
buttons, depending on the desired
band.
Once the Radio mode has been
activated, the display will show the
name (only RDS stations) and the
frequency of the selected radio station,
the frequency band selected (e.g.
FM1) and the preselect button number
(e.g. P1).

Frequency band selection

With the Radio mode active, press the
FM, AS or AM button briefly and
repeatedly to select the desired
reception band.