Change Audio Source; Stop; Pause; Previous Track - Fiat PANDA 2016 Owner's Handbook Manual

Pause

To pause the track you are listening to:
press / or the MUTE button
on the front panel of the Uconnect
Radio.
To resume listening to a track that you
have paused: press / or the
MUTE button on the front panel of the
Uconnect Radio.

Stop

To stop playing a track: say "Stop".
To resume, say "Play".
Note The "Play" command is only
available if playback has been stopped
using the "Stop" command.
Next track
To skip to the next track, using manual
interaction: while listening to a digital
track, press (steering wheel controls)
or (Uconnect Radio controls) (where
present).

Previous track

To return to the previous track, using
manual interaction: while listening to a
digital track, press (steering wheel
controls) or (Uconnect Radio
controls) (where present).

Change audio source

To change the active audio source
(Radio, USB/iPod, Tuner, Bluetooth®
Audio) press the SRC/OK or MEDIA
button on the front panel of the Ucon-
nect Radio, or, with voice interaction:
say "Select source USB/iPod, Radio,
Bluetooth® Audio".
Note While playing Bluetooth® audio,
there could be some incorrect displays
related to the phone. This is not due to
the radio, but depends on the informa-
tion sent by the phone.
BLUETOOTH® DEVICE
IMPORTANT NOTES
Access to the phonebook copied
onto the system is possible only when
the mobile phone from which it has
been copied is connected.
The names stored on the SIM card
or in your mobile phone memory can
be transferred to the system in different
ways, depending on the model of
mobile phone.
Getting to know the voice
commands
When talking to the system, you can
always use the voice command "Help"
to obtain detailed instructions on the
voice commands available for each
interactive stage.
Pairing a Bluetooth® device
Note This operation should be carried
out only with the vehicle stationary.
To pair your mobile phone with the
system, proceed as follows.
Manual procedure:
Activate the Main Menu by pressing
the MENU button;
select the SETTINGS option, then
the "Pairing" option.
Voice procedure:
Press and say "Settings". Then,
at the end of the message, say
"Pairing".
The system will show a PIN number
on the display to be used for pairing.
Using the search function of the Blu-
etooth® devices of your phone, search
for the "Radio BT" device.
When prompted, enter the PIN code
displayed on the instrument panel
using your mobile phone keypad. If
pairing is successful, the system will
say "Connecting" and at the end the
display will show, as confirmation, the
ID of the paired mobile phone.
Once the device has been paired, if the
function is supported by the phone,
the system automatically asks to
download the phonebook onto the
Uconnect Radio.
197