Third Brake Lights; Number Plate Lights - Fiat PANDA 2016 Owner's Handbook Manual

104
adjust the clip C fig. 105 and
disconnect the electrical connector D;
105
turn the bulb holder E and remove it,
extract the bulb and replace it;
refit the new lamp and carry out the
procedure described previously in
reverse.

THIRD BRAKE LIGHTS

These are located in the tailgate and
are LED lights. For replacement,
contact a Fiat Dealership.

NUMBER PLATE LIGHTS

To replace the bulbs proceed as
follows:
remove lens A fig. 106;
F1D0087
106
replace the bulb A fig. 107, releasing
it from the side contacts;
F1D0088
107
Insert the new bulb and make sure
that it is correctly clamped between the
contacts, then refit the lens A fig. 107.
WARNING
133) Modifications or repairs to the electric
system that are not carried out properly
or do not take the system technical
specifications into account can cause
malfunctions leading to the risk of fire.
134) Halogen bulbs contain pressurised
gas; in the case of breakage they may
burst.
135) Before replacing the bulb, wait for the
catalytic converter to cool down: RISK
OF BURNS.
WARNING
F1D0089
50) Halogen bulbs must be handled by
holding the metallic part only. Touching the
transparent part of the bulb with your
fingers may reduce the intensity of the
emitted light and even reduce the lifespan
of the bulb. In the event of accidental
contact, wipe the bulb with a cloth
moistened with alcohol and let the bulb
dry.
51) If possible, we recommend to have
bulbs replaced by a Fiat Dealership. The
correct operation and alignment of the
external lights are absolutely essential for
the safety of the vehicle and of compliance
with the law.
F1D0090
111