Toshiba B-EX4T2 Series Manual page 65

APPENDIX 2 INTERFACE
 Wireless LAN
・ Option: B-EX700-WLAN-QM-R
Standard:
Client protocol:
Print protocol:
Security protocol:
Antenna:
Parameter setting:
Default IP address:
Default subnet mask:
Certification:
NOTE:
MAC address of the Wireless LAN module will be necessary when setting the MAC address filtering function of
an access point. Please ask a service person of your nearest TOSHIBA TEC service representative.
・ Option: B-EX700-WLAN3-QM-S
Standard:
Client protocol:
Print protocol:
Security protocol:
Antenna:
Parameter setting:
Default IP address:
Default subnet mask:
NOTE:
The printer's LAN connector (Ethernet) is used to connect the option to the printer.
Do not use the 5GHz band for communication outdoors. Using wireless devices outdoors on the 5GHz
band is prohibited. To operate the wireless LAN of this product outdoors, only use the 2.4GHz band.
 USB Host interface (Option: B-EX700-RTC-QM-R)
Physical Layer:
Transfer type:
Transfer rate:
Number of ports:
Power supply:
Connector:
Conforming to IEEE802.11b, and IEEE802.11g
TCP/IP, Socket, LPD (LLPR), DHCP/WINS, HTTPD (SNMP)
Socket communication/LPR
WEP (64 bits/128 bits) or AES, TKIP (only when using WPA, WPA-PSK)
Shared key (for WEP), PSK, PEAP, TLS, TTLS, MD5, LEAP, EAP-FAST
Built-in
via USB, LAN, WLAN, RS-232C, Parallel
192.168.10.21
255.255.255.0
Wi-Fi, CCX V3, V4
IEEE802.11a/b/g/n/ac
TCP/IPv4, Socket, LPR, DHCP, (SNMP v2c)
Socket communication/LPR
WEP 128 bits, TKIP(WPA), AES(WPA2)
Pre Shared Key(WPA/WPA2-Personal),PEAP, EAP-TLS, EAP-TTLS, EAP-FAST
External antenna (Rod type)
via USB or WLAN
192.168.10.20
255.255.255.0
WARNING!
Conforming to V2.0 Full speed
Control transfer, Bulk transfer
Full speed (12M bps)
1
50mA output
Type A
60