Adding Tracks - Grundig Discalo CCD 6300 Instructions Manual

OPERATION
___________________________________________
Press »MEMORY« to save the track.
4
– Display: »P 02«, the »
Note:
Repeat steps and
3
5 To start playback of the track memory, press
– Playback begins with the first programmed track.
Note:
When creating a track memory, if no button is pushed for more than 10
seconds, the system will end the procedure automatically. You then have
to start the procedure again from the beginning.
Changing from the track memory to normal playback
To end playback of the track memory press
1
Press »CD
2 MODE«.
•
– The »
PROG.
3 Press » PLAY/PAUSE
– Normal playback begins at the start of the CD.
Note:
The track memory remains stored when you start normal playback.
Changing from normal playback to the track memory
Press »STOP « to end normal playback.
1
7
2 Press »CD MODE« twice.
•
– The »
PROG.
Press »
3 PLAY/PAUSE
– Playback begins with the first programmed track.
Changing the track selection
To replace a stored track, keep pressing »MEMORY« until its memory
1
position appears in the display.
Press »SKIP
2 I
4
Press »MEMORY« to store the new track.
3

Adding tracks

To add a track, press »MEMORY« repeatedly until the next free
1
memory position e.g. »P 08«, appears.
Press »SKIP « or
2 I
4
3 Press »MEMORY« to store the desired track.
•
« LED flashes.
PROG.
to program more tracks.
4
« LED goes out.
II«.
« LED glows.
II«.
« or »I SKIP« to select the new track number.
3
»I SKIP« to select the desired track number.
3
»PLAY/PAUSE
II«.
»STOP «.
7
31