Live Set-Up - Behringer Eurodesk SX3242FX User Manual

Ultra-low noise design 32/24-input 4-bus studio/live mixer with xenyx mic preamplifiers, british eqs and dual multi-fx processor

Hide thumbs Also See for Eurodesk SX3242FX:

Table of Contents

EURODESK SX3242FX/SX2442FX

4.2

Live set-up

Fig. 4.2:

Wiring the console for live operation

This example shows a classic live set-up. As in the studio example, four drum microphones, bass, keyboard (stereo channel), guitar

and two vocal microphones are connected. The four drum channels (kick drum, snare, overhead L, overhead R) are mixed down to

two subgroups and then routed to the main mix. This way, it is possible to conveniently control the volume of the entire drums in the

main mix with the two subgroup faders. The built-in compressor insert effect is used for the bass. The corresponding input channel is

separate from all buses and the bass signal is routed directly from the internal effects processor to the main mix bus. The MAIN/SUB

switch must not be pressed in this case and the position of the SUB 1/2 SUB 3/4 switch is irrelevant.

Wiring examples

Table of Contents

Show Quick Links

Table of Contents

Eurodesk sx2442fx