Honda CRF250F 2020 Owner's Manual page 67

Table of Contents

Advertisement

Engine Oil
Checking & Adding Oil
RIGHT SIDE
(2)
(3)
(1) oil fill cap/dipstick
(2) upper level mark
(3) lower level mark
1. Park your motorcycle on a firm, level
surface.
2. Clean around the oil fill cap/dipstick (1) and
nearby surfaces.
60
Servicing Your Honda
3. Start the engine and let it idle for 3-5
4. Unscrew and remove the oil fill cap/dipstick.
5. Hold the motorcycle upright.
6. Insert the oil fill cap/dipstick until it seats,
7. Remove the oil fill cap/dipstick and check
(1)
8. Insert the oil fill cap/dipstick and screw it in
9. Check for oil leaks.
minutes. Stop the engine. Wait 2-3 minutes.
Wipe it clean.
but do not screw it in.
the oil level.
• If the oil is at or near the upper level mark
(2), you do not have to add oil.
• If the oil is below or near the lower level
mark (3), add the recommended oil until it
reaches the upper level mark. (Do not
overfill.)
tightly.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents