Bosch GKT18V-20GC Operating/Safety Instructions Manual page 26

2610055543.qxp_GKT18V-20GC 5/26/20 4:37 PM Page 26
Precision Sawing With Track
The GKT18V-20GC is designed specifically
for precision straight cutting while using a
track for guidance (Fig. 27).
• Make sure that track 40 is prepared,
positioned and clamped as shown in
"Preparing Track" section on page 16.
• Make sure that the saw's footplate is
properly placed on track.
• Take extra care when placing saw on
portion of a track that extends beyond
the leading or ending edge of the
Operating Instructions
2
19
40
4
50
workpiece.
• When starting a cut in from the leading
edges of the workpiece, following
instructions in "Plunge Cuts" section
below.
• Prior to removing saw from track, raise
saw head and retract blade first and
allow blade to come to a complete stop.
26
Fig. 27
40