Dometic 300 Series Installation And Operation Manual page 11

Gravity-Flush Toilet
5 .1 Serviceable Parts
This section shows the replacement parts for
the toilet models. Actual available parts may
vary. Refer to the complete parts list (available
online at www.dometic.com) for additional
information. To order parts, contact your local
Dometic service partner or dealer.
t
y
13 300 Series Serviceable Parts
Toilet Seat
q
Flush Ball Seal
w
Vacuum Breaker
e
Water Valve
r
5 .2 Maintenance Kits and Materials
These kits are available for purchase:
• 300/310/320 Series Toilet Water Valve
Replacement Kit
• Flush Ball Seal Replacement Kit
• Vacuum Breaker Kit
Recommended for cleaning:
• SeaLand Toilet Bowl Cleaner
®
• Soft bristle brush
• Rubbing alcohol (300/301 only)
EN
q
w
e
r
i
u
Pedal Cover
t
T-Bolts
y
Floor Flange Seal
u
Supply Hose
i
Recommended for winterization/storage:
• Nontoxic antifreeze (propylene glycol)
Optional for troubleshooting:
• SeaLand Holding Tank Deodorant
• Silicone spray
5 .3 Performing Routine Toilet
Cleaning
For routine cleaning, use SeaLand toilet bowl
cleaner. If this cleaner cannot be found in your
area, contact Dometic for your nearest dealer. If
the cleaner is not available, use a non-abrasive
bathroom and toilet bowl cleaner. Follow label
instructions.
For stubborn stains on model 300 and 301 toilet
bowls, carefully use rubbing alcohol to wipe and
remove the stain.
5 .4 Cleaning the Flush Ball and Seal
After a period of time, mineral deposits from
hard water may build up on the flush ball or seal,
resulting in a slow water leak. To prevent this,
periodically clean the flush ball and seal.
w
14 Cleaning Debris from the Flush Ball Seal
Flush Ball Seal
q
1. Remove minor debris from the flush ball and
seal by slowly depressing and releasing the
flush pedal several times. This will loosen
and rinse debris from the surfaces. Repeat
several times for stubborn buildup.
2. If step 1 does not fully clean the ball and seal,
clean with a soft bristle brush and SeaLand
toilet bowl cleaner.
– Fully clean the top of the flush ball and
under the seal where it contacts the flush
ball.
Maintenance
q
Flush Pedal
w
11