Unpacking The Air Conditioner; Install The Air Conditioner - Haier QPCA08 Installation And User Manual

INSTALLATION INSTRUCTIONS
1. UNPACK AIR CONDITIONER
WARNING
Excessive Weight Hazard
• Use two or more people to move and install air
conditioner.
• Failure to do so can result in back or other injury.
NOTE: Before using the air conditioner, keep it upright
for at least 2 hours.
• Remove packaging materials. Save the carton and the
foam packaging for storing the air conditioner when not
in use.
NOTE: There are NO packing materials inside the air
conditioner to remove—Do Not open the cabinet.
• Properly dispose of/recycle all packing material.
• Handle the air conditioner gently.
• Keep the air conditioner upright and level. Do not set the
air conditioner on its side, front, back or upside down.
INSTALL EXHAUST NOZZLE TO
2.
MAIN WINDOW PANEL
1. Hold the main
window panel so
that the L-shaped
edges of the panel
are facing you.
2. Align the exhaust
nozzle with the slots in
the opening, and then
insert and slide the nozzle
to access the hole from
the back of the main
window panel.
3. Turn the main window panel over, so that the nozzle
is away from you. Insert
a flat tip screw through
the hole to fasten the
window panel to the
adapter.
12
INSTALL MAIN WINDOW PANEL AND
3.
EXTENSION PANELS
NOTE: Measure the window opening and use the
extension panels as referenced on page 10 to fit your
window.
1. Open the window and place the window kit assembly
into the window.
NOTE: The window assembly is designed to
accommodate either a double hung or sliding window.
2. Adjust the extension panel(s) to the width or height of
the window as shown.
3. Depending on the number of extension panels used,
turn the knobs to secure the extension panel(s) to the
main panel. Install from the back.
NOTE: There are many window types on the market
today. Use the foam strips and brackets (provided) to
secure the extension panels that will fit the window
opening.
Double Hung Window
Sliding Window
49-5000543 Rev. 1