Haier QPCA08 Installation And User Manual page 13

INSTALLATION INSTRUCTIONS
INSTALL MAIN WINDOW PANEL AND
3.
EXTENSION PANELS (cont)
4. For vinyl windows only.
Skip to step 6 for wood windows.
Place the two top window brackets and two bottom
window brackets where they will best support the
extension panels. Use painted screws to attach top
bracket to the support panels.
Before Assembly
Use only for vinyl
A
B
After Assembly
Attach with pointed screw(2).
5. Apply the top foam strip (provided) across the
top of the window panel assembly, and then
apply the bottom foam strip (provided) across the
bottom front edge of the window panel assembly, as
shown.
Typical Vinyl Window Installation
A
B
C
D
49-5000543 Rev. 1
A
B
E
INSTALL MAIN WINDOW PANEL AND
3.
EXTENSION PANELS (cont)
6. Place the window panel assembly in the window, and
using the screws provided, fasten the assembly to the
window sill and window frame.
7. Using one pointed screw, install the Security bracket to
the window.
NOTE: The security bracket prevents the window from
being opened from the outside.
A
B
ATTACH EXHAUST HOSE TO THE
4.
EXHAUST NOZZLE
1. Grasp both ends of the exhaust hose and gently pull to
expand the hose.
NOTE: Do not attach additional hoses to extend the
length. This would decrease cooling efficiency and may
damage the air conditioner.
2. Using a clockwise motion, attach the open end of the
exhaust hose to the exhaust nozzle.
13