Mercedes-Benz G Series Operator's Manual page 252

Note:
If the electronic key is in starter switch position 0 or 1,
an alarm will sound if the transfer case is in
position "N" and the drivers door is opened.
Engage transfer case to gear position "HIGH" or "LOW".
Driving systems
Instruments
Operation
and controls
Instrument
Driving
cluster display
Switching from "LOW" to "HIGH":
• The shift procedure can only be performed with the
engine running.
• The vehicle speed must not exceed 40 mph
(70 km/h).
• Move selector lever for the automatic transmission
to position "N", see page 207.
Press the "HIGH" switch (2).
Once the shift is complete, the gear position "H" is
displayed in the transfer case indicator (3).
If the multifunction display shows the message
"TC SHIFT CONDITIONS NOT FULFILLED", the shift
does not occur.
At least one shift condition was not met. Repeat the shift
procedure.
Note:
Do not depress the accelerator when switching the
automatic transmission from position "N" to "D".
249
Practical hints Car care
Technical
Index
data