Mercedes-Benz G Series Operator's Manual page 112

Press the è or ÿ button repeatedly until the
individual setting preliminary display (1) appears.
Press the j or k button until the setting menu
"SETTINGS" (2) is displayed.
Pressing the æ or ç button controls the selection
marker in the setting menu.
"INSTRUMENT CLUSTER", see page 110.
"LIGHTING", see page 114.
"VEHICLE", see page 118.
"CONVENIENCE", see page 120
Pressing the è or ÿ button displays the next or
previous system.
Note:
These settings may only be performed with the
electronic key in starter switch position 1 or 2.
Multifunction steering wheel, multifunction display
Instruments
Operation
and controls
Instrument
Driving
cluster display
To return menu "SETTINGS" (2) to its factory
setting:
• Call up the individual setting preliminary
display (1) or display (2).
• Press the reset knob on the instrument cluster
(see page 84) for approximately 3 seconds.
Display (3) will appear.
• Press the reset knob on the instrument cluster once
more. The menu "SETTINGS" is reset to factory
settings, acknowledged by display (4).
The individual setting preliminary display (1) will
appear if you do not press the reset knob on the
instrument cluster within about 5 seconds. The
setting menus will not be reset.
Note:
For safety reasons, the individual setting "LIGHT
CIRCUIT HEADLAMP MODE" in menu "LIGHTING"
cannot be reset while driving, see page 114. If an
attempt is made, the message "LIGHTING" – "CANNOT
BE COMPLETELY RESET TO FACTORY SETTINGS
WHILE DRIVING" will be displayed.
109
Practical hints Car care
Technical
Index
data