Mercedes-Benz G Series Operator's Manual page 179

Instruments
Operation
and controls
Interior equipment
1. Engage partition net in holders (1). The lift
tensioner (2) must point in driving direction
(forward).
Instrument
Driving
cluster display
Practical hints Car care
176
2. Set the length of the tie downs (3) and lift
tensioner (2) to the rings (5).
3. Insert tie down hooks (4) in rings (5). Pull on loose
ends of tie downs until net is slightly tensioned.
4. Fold up seat bench until it locks in place. The
partition net will be tightened by the rear seat bench
cushion.
After driving a short period, check the tension of the
partition net, re-tighten if necessary.
Technical
data
5
4
Index