Mercedes-Benz G Series Operator's Manual page 120

To return menu "LIGHTING" (3 to 6) to its factory
setting:
• Call up menu (3 to 6).
• Press the reset knob on the instrument cluster (see
page 84) in the instrument cluster for approximately
3 seconds. Display (7) will appear.
• Press the reset knob on the instrument cluster once
more. The individual setting menu "LIGHTING" is
reset to factory settings, acknowledged by
display (8).
The individual setting display "SETTINGS" (2) will
appear if you do not press the reset knob on the
instrument cluster within about 5 seconds. The
setting menus will not be reset.
Multifunction steering wheel, multifunction display
Instruments
Operation
and controls
Instrument
Driving
cluster display
Note:
For safety reasons, the individual setting "LIGHT
CIRCUIT HEADLAMP MODE" in menu "LIGHTING"
cannot be reset while driving. If an attempt is made, the
message "LIGHTING" – "CANNOT BE COMPLETELY
RESET TO FACTORY SETTINGS WHILE DRIVING" will
be displayed.
117
Practical hints Car care
Technical
Index
data