Machine Settings; Technical Data - Zanussi ZTK 123 User Manual

Drying cycle lasts an unusual-
ly long time. Note: After up to
5 hours the drying cycle ends
automatically (see 'End of dry-
ing cycle').

Machine settings

BUZZER permanent off
1. Turn the programme selector to any pro-
gramme.

Technical data

Dimensions (mm)
Max. depth
(with the appliance door open)
Max. width
(with the appliance door open)
Electrical connection
Drum volume
Weight of the appliance
Laundry: max. weight
Type of use
Ambient temperature
1)
Energy consumption
Annual energy consumption
Energy efficiency class
Power consumption
www.zanussi.com
Lint filter clogged.
Fluff filter clogged.
Load volume too big.
Laundry insufficiently spun.
Particularly high room temperature.
Temporary switching off of the com-
pressor to avoid overload.
Width / Height / Depth
Voltage
Frequency
Fuse
Total power
Min.
Max.
kWh/cycle
2)
Left-on mode
Clean lint filter.
Clean fluff filter.
Reduce load volume.
Laundry must be adequately spun.
Automatic process, there is no fault
with the appliance. If possible, lower
the room temperature.
2. Press simultaneously the
Cotton /
hold down for approx. 5 seconds.
3. The buzzer is by default always off.
850 x 600 x 580 mm
1090 mm
950 mm
230 V
50 Hz
10 A
2350 W
108 l
38 kg
7 kg
Household
5 °C
35 °C
4,70 kWh
552 kWh
C
0 W
Delicate and
Synthetic buttons and
29