Reversing The Door Of Your Appliance - Baumatic BR16.3A Instruction Manual

Reversing the door of your appliance

Caution! After unscrewing any of the fixing
hinges, hold the door to prevent it from falling
and causing damage.
Any parts that you remove from the appliance
whilst reversing the door, should
later use.
WHILST SUPPORTING THE DOOR. Unscrew the upper hinge
o
screws.
Remove the door from the bottom hinge.
o
Unscrew the leg holder fixing screws.
o
Tilt the appliance backward at a
o
maximum angle of 35° Unscrew the
leg support screws (C) - left and rig
and remove the leg support cover (
Then place it on the opposite side
Unscrew, remove and then replace
the position of the end switch (E
decorative peg (F) (for models w
forced doo r closing system).
o Unscrew the three screws fixing the
bottom hinge and then fix the bottom
hinge on the opposite side.
o To fit the door on the opposite side of
the refrigerator proceed with the abov
be retained for
On the bottom side of
o
the door unscrew the
swing stopper screws
and remove the stopp
(A). Fix the attached
stopper with its bearing
on the opp osite side of
the door.
Unscrew the forced door
o
closure system (B) and
fix it to the opposite
of the door (certain
m odels only).
ht,
D).
.
) and
ith
e procedure in reverse.
er
side
21