Repeat And Shuffle Play; Scan; Other Functions; Changing The Sound Settings - Sony CDX-GT42IPW Operating Instructions Manual

Repeat and shuffle play

1
During playback, press (3) (REP) or
(4) (SHUF) repeatedly until the
desired setting appears.
Select To play
REP TRK
track repeatedly.
REP ALB album repeatedly.
REP ART
artist repeatedly.
REP PLY playlist repeatedly.
SHUF ALB
album in random order.
SHUF ART artist in random order.
SHUF PLY
playlist in random order.
SHUF ALL all tracks in random order.
To return to normal play mode, select "REP
OFF" or "SHUF OFF."
Note
(1)/(2) (ALBUM –/+) will not work during shuffle play.

Scan

You can quickly locate a specific point on the
iPod.
1
During playback, press (5) until
"SCAN ON" appears.
The first 10 seconds of each track will be
played.
To return to normal play mode, select "SCAN
OFF."
Note
This function will not work during shuffle play.
10

Other functions

Changing the sound settings

Adjusting the sound
characteristics — BAL/FAD/SUB
You can adjust the balance, fader, and subwoofer
volume.
1
Press the select button repeatedly
until "BAL," "FAD" or "SUB" appears.
The item changes as follows:
LOW* t MID* t HI*
1 1
BAL (left-right) t FAD (front-rear) t
SUB (subwoofer volume)*
*1 When EQ3 is activated (page 10).
*2 When the audio output is set to "SUB"
(page 11).
"ATT" is displayed at the lowest setting, and can
be adjusted up to 21 steps.
*3 When AUX source is activated (page 11).
2
Rotate the volume control dial to
adjust the selected item.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.

Customizing the equalizer curve

— EQ3

"CUSTOM" of EQ3 allows you to make your
own equalizer settings.
1
Select a source, then press (EQ3)
repeatedly to select "CUSTOM."
2
Press the select button repeatedly
until "LOW," "MID" or "HI" appears.
3
Rotate the volume control dial to
adjust the selected item.
The volume level is adjustable in 1 dB steps,
from –10 dB to +10 dB.
Repeat steps 2 and 3 to adjust the equalizer
curve.
To restore the factory-set equalizer curve,
press and hold the select button before the
setting is complete.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
Tip
Other equalizer types are also adjustable.
t
1
2 t AUX* 3