Installation; Installation Precautions - ABB Magne 3 Product Manual

4

Installation

Installation shall be done in accordance with a risk assessment for the individual application.
Installation shall be carried out by authorized personnel and in accordance with instructions
in this document.
Please read and understand Magne and Eden product manuals before starting.
4.1

Installation precautions

Warning! All safety functions shall be tested before starting up the system.
Warning! Follow the instructions carefully to avoid personal injury or damage to the
Warning! Do not defeat, tamper or bypass the safety function. Failure can result in
Warning! The M12 connector shall be connected after Magne has been installed on the
Caution! It is important that Eva is correctly positioned and oriented in relation to the
Caution! Magne shall be installed as close to the door handle as possible. The
Caution! Magne 4 shall be connected to the power supply after the door is closed and
Caution! After installation, check the locking function and that the surfaces of the
2TLC172315M0201 Rev.M3
device.
death or serious injury.
intended surface.
integrated Adam sensor in Magne 4. See chapter 'Positioning and
orientation of Eva with Magne 4'.
distance between the lock and the handle creates a lever effect, reducing the
holding force. The bigger the distance, the greater the risk of the anchor
plate not being parallel and aligned with the electromagnet, which
significantly reduces the holding force.
when Eva is within sensing distance of Adam.
magnet and the anchor plate are parallel, i.e. that full contact is obtained
when the door is closed. If the anchor plate tilts, the holding force of the lock
can be significantly reduced or eliminated.
9