Accessories And Parts - ABB Magne 3 Product Manual

3.3

Accessories and parts

A standard Magne installation includes a Magne, an anchor plate and, with Magne 4, an Eva
actuator. Anchor plate and Eva actuator are ordered separately. Several accessories are
available. See chapter 'Model overview' for ordering codes and further details.
Anchor plate must be ordered with every Magne.
Anchor plates are delivered with a cellular rubber. Anchor plate 32E has an integrated
permanent magnet. It holds the door closed with a force of approximately 30 N when the
power to Magne is disconnected. Anchor plate 32D is without a magnet.
Eva actuator must be ordered with every Magne 4.
Eva units with general code all have the same code and fulfill the requirement for a low-level
coded interlocking device according to EN ISO 14119:2013.
Eva units with unique code all have a different unique code and fulfill the requirements for a
high-level coded interlocking device according to EN ISO 14119:2013.
Accessories for connection in series
Y-connectors and other accessories are available to facilitate connection in series.
Anchor plate Cellular rubber
Eva actuator Y-connector
2TLC172315M0201 Rev.M3
8