Removing And Replacing A Pcie Adapter On The System Backplane Of The 8335-Gca Or 8335-Gta; Removing A Pcie Adapter From The System Backplane In The 8335-Gca Or 8335-Gta - IBM S822LC Servicing

Figure 44. Installing the PCIe riser
5. Using your labels, replace any plugs that you removed from the PCIe adapter. Using your labels,
insert the cables into the PCIe adapter.
Removing and replacing a PCIe adapter on the system backplane of
the 8335-GCA or 8335-GTA
Follow these steps to remove and replace Peripheral Component Interconnect (PCI) Express (PCIe)
adapters in the system backplane of the IBM Power System S822LC (8335-GCA and 8335-GTA).

Removing a PCIe adapter from the system backplane in the 8335-GCA or 8335-GTA

To remove a PCIe adapter from the system backplane, complete the steps in this procedure.
About this task
Attention: For safety and airflow purposes, if you remove parts from the system, you must ensure that:
v PCIe tailstock fillers are present
v Graphic processor unit (GPU) or PCIe carriers are present and that either GPU or PCIe fillers are
installed in the carriers.
Procedure
1. If needed, label and remove the cables from the PCIe adapter. Also if needed, label and remove any
plugs that extend out of the PCIe adapter.
2. Ensure that you have the electrostatic discharge (ESD) wrist strap attached. If not, attach it now.
3. Remove the PCIe adapter from the system backplane
Removing and replacing parts
43