Table of Contents
Advertisement
READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE OPERATING YOUR SOLAR LIGHT.
Step 1
Attach the ground stake to a pointed
connector. Push approximately 3" of the
ground stake into the ground. If the
ground is too hard, soak area with water
to soften.
Step 2
Insert light head into ground stake. The
photocell light sensor should point away
from other nighttime light sources.
Step 3
Charge in direct sunlight for 10-12 FULL,
SUNNY DAYS. The light will turn on
automatically at night. Allow at least
10-12 cycles (i.e., 10-12 days and nights
of charging and discharging) for the
battery to charge to its full capacity.
3
OPERATING INSTRUCTIONS
SAVE THIS MANUAL FOR FUTURE REFERENCE.
Advertisement
Table of Contents
