Assembly Instructions - Brinkmann 822-0408-0 Owner's Manual

ASSEMBLY INSTRUCTIONS

Inspect contents of the box to ensure all parts are included and undamaged.
2
3
4
A flathead screwdriver is required for
mounting the wall bracket.
PARTS LIST:
1
1
2
3
4
5
6
Select a location with full, direct sunlight.
Shady locations will not allow the battery to
charge fully and will reduce the hours of
6
nighttime light.
NOTE:
The selected location should not be near a
5
nighttime light source such as a porch light or
street light, as these might keep the solar
lights from automatically turning on. The solar
lights should not be placed closer than 5 feet
from one another. This could cause the solar
lights to flicker from the adjacent light source.
Classic Tier Light Head Fixture
Connector
Ground Stake
Ground Connector w/Point
Deck/Wall/Fence Mounting Bracket
Mounting Screws (2)
The rechargeable Ni-Cd battery
must be allowed to fully charge to
operate properly. Partially charging
the battery on a consistent basis
will drastically reduce the life of
the battery.
2