Kenwood TK-3160 Service Manual page 9

TK-3160
Assembling
• Installation of battery terminal block and
packing
Install them so that no distortion or deformation occurs.
• Installation of speakers and cushion, and wire
styling of speakers
Install the speakers so that they do not protrude from the
cushion. Perform the wire styling of speakers as shown in a
photograph.
• Attaching the cushion
Attach the cushion as shown in Fig. 1.
Note: Cushion must not cover the screws A,B and C.
8
DISASSEMBLY FOR REPAIR /
Wire Styling
引线
G13-2017-04
C
G13-2020-04
A
B
Fig. 1 / 图１
维修拆卸
组装
• 电池终端块和垫片的安装
安装并且注意不要让它们发生变形。
• 扬声器、扬声器垫以及扬声器引线的组装
Install the cushion according to the guide.
请按照指示安装扬声器垫。
安装时请不要把扬声器从垫子中脱出来。如照片所示放好扬
声器引线。
• 粘好扬声器垫
如图 1 所示粘好扬声器垫。
Take screw B and MIC edge as reference line
when sticking.
当粘扬声器垫时，以螺丝 B 和 MIC 边缘为参考线。
G13-2018-04
Stick between screw A and B.
粘贴在螺丝 A 和 B 之间。
注∶扬声器垫不能盖住螺丝 A、B 以及 C。