Brinkmann Pro Series 6418 Owner's Manual page 31

Step 19
Place the heat distribution plates on
lower level of grill body assembly
directly above burners.
Step 20
Place cooking grills on support ribs
directly above heat distribution
plates.
Step 21
Place warming rack in slots above
cooking grills.
Step 22
Remove igniter cap and insert battery
with positive end of battery toward
igniter cap. Ensure spring is in place
inside igniter cap. Replace igniter cap
and make sure the igniter is working
properly.
Step 23
Slide small basket into slots located
on inside of left door.
Igniter Cap
Warming Rack
Cooking Grills
Heat Distribution
Plates
Battery
30