Installation; Troubleshooting - TP-Link TD-W8901G Manual

Installation

Note The product model shown in this QIG is TD-W8901G, as an example.
Insert the provided Resource
CD into your CD-ROM drive.
Then the Setup Wizard will
automatically pop up on your
computer's screen.
Please select
product model and click
Start Setup.
Then a flash video will pop up and
show you how to connect your
devices. After that, the Easy
Setup Assistant will start.
Click START, and then follow
the step-by-step instructions
until you complete
configuration.

Troubleshooting

1. How can I configure my Router without the Resource CD?
1) Connect your computer to the Router with an Ethernet cable
2) Open a web browser and enter the address http://192.168.1.1
3) The default username and password are both admin
4) If you have changed the username or password and can not remember it,
you will need to restore your Router's configuration to its factory default
settings then use the default username and password.
2. How do I restore my Router's configuration to its factory default settings?
your
the
1