Table of Contents
Advertisement
3. INITIAL SETTINGS
3.6
Stabilization Setting
The [Stabilization] menu compensates for the effects of heaving, and requires a Sat-
ellite Compass.
Note 1: The menu is not available when there is no data from the Satellite Compass.
Note 2: This function is NOT available when [In Trigger] in [Shared Settings] is set to
[On].
3.6.1
Stabilization for main system transducer
Set the stabilization menu for main system and external system transducers when the
[External sounder] is set [Off].
1. Select the [Advanced Settings] icon (
the [Advanced Setting] icon (
2. Select [Stabilization] menu from the [System] menu.
The [Stabilization] menu appears.
3. Set the calibration parameters referring to the table below:
Item
[Stabilization]
[Stabilization
Area]
[Beam Stabili-
zation]
3-16
FCV-38[ver 0252473-xx.xx]
Setting values
[Off] (default),
[On]
[0] to [20]
(default: [20])
[Off] (default),
[On]
) from the InstantAccess bar, and select
) from the expanded menu bar.
Motion Sensor
Meaning
Set to [On] to enable the stabilization mode.
Turn this function on when seas are rough, to get
stable pictures. When heaving stabilization is
turned on, the symbol (
vance] header on the screen.
Adjusts the stabilization line (m).
Set to [On] to enable the beam stabilization.
) appears at the [Ad-
Advertisement
Table of Contents
