Resetting To Factory Default Settings - Axis 213 PTZ User Manual

AXIS 213 - System Options
50

Resetting to Factory Default Settings

To reset the AXIS 213 to the original default settings, go to the System Options >
Maintenance web page (described in Maintenance, on page 47) or use the Reset
button on the AXIS 213 as described below:
Using the Reset Button
Follow the instructions below to reset the AXIS 213 to factory default settings using
the Reset Button.
1. Switch off the AXIS 213 by disconnecting the external power supply.
2. Using a suitably pointed object, press and hold the Reset button while you
reconnect the power connector.
3. Keep the Reset button pressed for approximately 15 seconds.
4. Release the Reset button.
Note:
Resetting to the factory default settings using the Reset Button will cause all parameters (including
the IP address) to be reset. Refer to Maintenance, on page 47 for other methods that do not reset
the IP address.