Axis 213 PTZ User Manual page 45

AXIS 213 - System Options
45
HTTPS
If applicable, enter the HTTPS port the AXIS 213 will use. The default setting (443)
can be changed to any port within the range 1024-65535. HTTPS is used to provide
encrypted web browsing.
NAT Traversal
Use NAT traversal when your AXIS 213 is located on an intranet (LAN) and you wish
to make it available from the other (WAN) side of a NAT router. With NAT traversal
properly configured, all HTTP traffic to an external HTTP port in the NAT router will
be forwarded to the network camera.
Enable/Disable - When enabled, the AXIS 213 will attempt to configure port mapping
in a NAT router on your network, using UPnP™.
Use manually selected NAT router - Select this option to manually select a NAT
router. Enter the IP address for the router in the field provided.
If a router is not manually specified, the AXIS 213 Network Camera will automatically
search for NAT routers on your network. If more than one router is found, the default
router will be selected.
Alternative HTTP port - Select this option to manually define an external HTTP port.
Enter the port number in the field provided. If no port is entered here a port number
will automatically be selected when NAT traversal is enabled.
RTSP
The RTSP protocol allows a connecting client to start an MPEG-4 stream. Enter the
RTSP port number to use. The default setting is 554.
Network Traffic
The default setting is Auto-negotiate which means that the correct speed is
automatically selected. If necessary, you can set the connection speed by selecting it
from the drop-down list. 10BaseT (Half/Full Duplex), 100BaseTX (Half/Full Duplex).
Maximum bandwidth - Specify, in Mbit/s or Kbit/s, the maximum bandwidth that the
AXIS 213 is allowed to use on your network. This is a useful function when
connecting the AXIS 213 to busy or heavily loaded networks. The default setting is
Unlimited.
For more information, please refer to the online help files